Tubescreamer |
Here is the classic tubescreamer, including an optional asymmetric clipping. My source is GeneralGuitarGadgets.com.
| Up to Circuits Topic |
Trackback URL for this post: right-click and copy
Angel said:
Hi, only to say THANKS for your layout, I have used it for my own TS pedal and it sound gorgeus, again… Thanks.
Ángel.
Posted 29.03.2008 at 7:10 am
Nico Daneel said:
Hi, I did an alternative layout with groundstar and no wire links as well as mounting holes, will you e-mail me so I know what address to forward the files to…
Many thanks
Nico aka. Nordic (from diyaudio.com)
Posted 13.04.2008 at 11:10 am
Manny M said:
HI again. I just finished the Tubescreamer from your layout and Schematic. Plugged it in on bypass and heard the guitar…but when I switched the FX on no sound came out. What could be wrong??. I did solder together a tracing probe with a .1uF cap to tip of guitar cord and the shield to the ground tab on the plug socket. I plugged the cord to the amp and the ground to fx ground and put the amp on low volume but cannot hear a thing??. Am I using the tracer the wrong way??. Should I plug the guitar into the fx first??.
Thanks a million you have a really good website and I hope you have found a home to settle into. Right now I have my daughter, son-inlaw and 3 kids and 3 cats to boot….they sold and are inbetween homes :). It could be worst!! I lost my hobby room to them but I do love them alot.
God bless.
Manny
Posted 17.06.2008 at 8:28 pm
gaussmarkov said:
hey hey!
good idea to put together an audio probe. let’s debug it off-line and post the results. i’ll send you an email.
gm
Posted 18.06.2008 at 9:39 am
Marcel said:
I’m thinking of building my own clone tube screamer, I’m interested to buy the pcb.
Do you provide it?
If not where can I get it?
Posted 28.08.2008 at 11:23 am
gaussmarkov said:
i do not provide PCBs. the old stand-bys are generalguitargadgets.com and tonepad.com.
Posted 28.08.2008 at 11:50 am